Download ONTIM Marvell MultiDL Flash Tool

On this page, we have contained the official link to download ONTIM Marvell MultiDL on your Computer. which can be used to flash Phone firmware .BLF extension.


Download ONTIM Marvell MultiDL

File Name: [] ONTIM_Marvell_MultiDL
Password : No

Download Link Below:
Click Here to Start Download


1, Extract the ONTIM Marvell MultiDL, and then get the folder to open, run one of the tools ONTIM_Marvell_MultiDL.exe, as shown below:

2, In the tool on the left side of the interface click on the System and then click Config, and then in the following Blf File text box to select the software to be downloaded after the blf file, select the click button to save the exit,

3, Click on the main interface in the tool and click Run,o ot On you system Keyboard Press F9 key before pressing F9 or running the Tool make sure you install the Driver 1st. you can find this in ONTIM Marvell MultiDL Folder.

4, Remove the phone battery and then install it back, hold down the volume “+” key, insert the USB cable, pop-up prompt box to install the driver, follow the prompt “click”, automatically install the driver, after installation In Device Manager, the following new device appears:

5, Again after successfully installed the drivers, Now step to unplug the data cable, and then re-deduction and then install the battery (more than 50% of the power), hold the volume “+” key, insert the USB cable, until the progress of the change (blue).

6, The entire process takes about 5-10 minutes, please prevail, as shown below download the progress of the green, on behalf of the success of mobile phone. (If the download progress bar turns red, it means that the download failed. Please repeat step 5)

7, after the upgrade is complete, click the menu bar System – stop. The tool will stop running, then unplug the data line, buckle the battery reload, and then boot like a brush machine to complete the first boot is slow, please be patient!

No Responses

Write a response